Advance Headers | Mild Steel Exhaust Extractors with EGR | Mitsubishi Triton MK Challenger 3.0L V6 | A348E
Couldn't load pickup availability
Advance Headers | Mild Steel Exhaust Extractors with EGR | Mitsubis...
Description
Description
Advance Headers High-Performance Mild Steel Exhaust Extractors with Integrated EGR Port for Mitsubishi Triton MK & Challenger 3.0L 24-Valve V6 6G72 Engines (1996–2006)
The Advance Headers Performance Exhaust Extractors (A348E) are heavy-duty tubular manifolds custom-engineered explicitly for the hard-working 4WD and 2WD generations of the Mitsubishi Triton and Challenger platforms. Tailored precisely to fit the high-revving 3.0-Litre 24-Valve SOHC inline-configured V6 petrol engine (legendary 6G72 platform) running integrated emissions controls, this rugged upgrade features an exact factory-matched Exhaust Gas Recirculation (EGR) port provision. By replacing highly restrictive factory cast iron log manifolds and dropping backpressure, it optimizes gas scavenging velocity to unlock crucial low-to-mid range torque, sharpen throttle response, and deliver a robust V6 exhaust note while maintaining emissions compliance.
PRODUCT CONTENTS:
- 1 x Heavy-Duty Mild Steel Left-Hand V6 Extractor Header Assembly
- 1 x Heavy-Duty Mild Steel Right-Hand V6 Extractor Header Assembly with Integrated EGR Fitting Take-off
Key Features:
- Features a precision-located EGR emissions fitting take-off to retain seamless compatibility with factory internal engine emissions circuits
- Heavy-duty mild steel construction structurally built to handle intense under-bonnet thermal expansion cycles and typical high-vibration off-road environments
- Custom clearance-mapped around both 2WD and heavy-duty 4WD drivetrain components, passing front driveshafts, transfer case structures, and front torsion bar suspension paths cleanly
- Tuned mandrel-bent primary piping pathways ensure completely uniform internal flow geometry, optimizing exhaust velocity past tight engine bay side walls and steering column shunts
- Thick, precision laser-cut cylinder head flanges maintain a flat, ultra-stable mating footprint to permanently guard against face distortion, thermal warping, and high-pressure exhaust leaks
Specifications:
- Brand: Advance Headers
- Part Number: A348E
- Material: Heavy-Duty Mild Steel (Standard Finish)
- Engine Suitability: Mitsubishi 3.0L V6 Petrol Only (6G72 24-Valve Single Overhead Cam Blocks Only)
- Emissions Configuration: Equipped with Integrated Exhaust Gas Recirculation (EGR) Fitting
- Drivetrain Compatibility: Fits Both 2WD and 4WD Chassis Layouts
- Component Type: Performance Exhaust Extractors / Headers
- Estimated Fitting Time: 3 Hours
- Welding / Modification Required: Yes (Automatic models require Y-piece modification at the catalytic converter flange)
- Warranty: 1 Year Manufacturer Warranty
⚠️ Crucial Emissions Control & Drivetrain Modification Warnings:
1. EGR Specific Fitment: This product (Part No. A348E) features an integrated EGR landing point designed explicitly for models requiring active EGR system hook-ups. If your build does NOT require an EGR connection, please review standard part number A348 to avoid needing to cap the open port during assembly configuration.
2. Automatic Transmission Fitment Warning: While this kit fits both manual and automatic gearboxes, automatic transmission models will require the Y-piece assembly to be custom-modified at the catalytic converter flange face during installation to maintain proper underbody clearance and alignment.
3. Strictly 24-Valve 6G72 Engines Only: This part is port-mapped exclusively for the later 24-valve SOHC cylinder head configurations. Because the exhaust face patterns and bolt spacing points differ, these headers will **NOT fit early 12-valve 6G72 engines** cleanly.
Please Note: Due to the required Y-piece modifications for automatic platforms and the tight clearance boundaries around 4WD front differential nodes, professional installation by an exhaust specialist or qualified mechanical workshop is required.
Important Information
- The image shown may not reflect the actual product design.
- Ensure your vehicle details match the application guide below before purchasing.
Vehicle Applications for A348E Performance Mild Steel Extractors (With EGR)
| Make | Model | Year Range Spec | Body Type | Chassis Series | Engine Details | Fitting Time | Drivetrain / Fitment Notes |
|---|---|---|---|---|---|---|---|
| Mitsubishi | Triton / GLX / GLS | 1996 – July 2006 | Single Cab / Club Cab / Dual Cab Utility (Ute) | MK Series Only | 3.0L V6 Petrol (6G72 24-Valve Configuration Only) | 3.0 Hours | 2WD & 4WD | Heavy-duty steel layout clearance-profiled around front axles, steering gear linkages, and torsion bars. Built with EGR configuration. Automatic models require Y-piece modification at the cat flange. |
| Mitsubishi | Challenger | 1998 – 2006 | 5-Door Wagon SUV | PA Series Only | 3.0L V6 Petrol (6G72 24-Valve Configuration Only) | 3.0 Hours | 4WD | Mandrel-bent performance path snakes within the compact SUV front frame rails, providing clean EGR plumbing routing. Automatic platforms require Y-piece fabrication at the cat flange interface. |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
